Close this search box.

Coalescing Separation Filter

Agglomerated Separation Filter Element Product Description:
    Agglomerated separator is mainly designed for liquid-liquid separation, which contains two kinds of filter elements, i.e.: agglomerated filter element and separation filter element. For example, in the oil de-watering system, after the oil flows into the agglomerated separator, it first flows through the agglomerated cartridge, which filters out solid impurities and agglomerates the very small water droplets into larger water beads. Most of the aggregated water droplets can be removed from the oil by its own weight and settled into the water collection tank. Then the oil flows through the separation filter element, due to the separation filter element has a good hydrophilic hydrophobicity, thus further separating the water, and finally, clean, water-free oil flows out of the agglomeration separator.
    The oil first enters the lower part of the filter shell by the inlet pipe, and then flows into the filter element from the outside to the inside, at which time the coarser particles will immediately precipitate and be discharged by the drain valve, and the smaller particles will be intercepted by the filter element. Later the clean oil is brought together by the filter element tray and flows out of the agglomerating separator by the outlet pipe. With the increase in the volume of treated oil, the pollutants deposited on the filter element will cause the differential pressure of the agglomerator to rise. When the differential pressure rises to 0.15Mpa, it means that the agglomerated filter element has been blocked and should be replaced.
    The oil flows into the primary tray from the inlet of the agglomerating separator, and then diverts to the inside of the primary cartridge, after the process of filtration, emulsion breaking, water molecule growing up and agglomerating, the impurities are retained in the primary cartridge, the agglomerated water beads are settled in the precipitation tank, and the oil enters into the secondary cartridge from the outside to the inside, and is gathered in the secondary tray, and then flows out from the outlet of the agglomerating separator. The material of the secondary filter element is hydrophobic, the oil can pass through smoothly, and the free water is blocked outside the filter element, flows into the sedimentation tank, and is discharged through the discharge valve.

Coalescing Separation Filter#2

Agglomerated Separation Filter Element Product Specifications:
Outside diameter: 3.5 inches, 4.5 inches, 6 inches;
Length: 16, 18, 20, 32, 36, 40, 72 inches.
Cartridge skeleton material: stainless steel and carbon steel

Application scope:
1、Aviation fuel, petrol, paraffin, diesel oil.
2、Liquefied petroleum gas, stone tar, benzene, toluene, xylene, isopropyl benzene, polypropyl benzene, etc.; and
3、 Turbine oil and other low-viscosity hydraulic oil, lubricating oil.
4、 Cyclohexane, isopropyl alcohol, cycloethanol, cyclohexanone, etc.; and
5、 Other hydrocarbons

Other Related Produce

How can we help?

Have a question or want more information on our products or services? We’d love to hear from you.

Scroll to Top

Contact US

Fill out the form below, and we will be in touch shortly.